-
Your shopping cart is empty!
Quantec Network Splitter
- Brand: CTEC
- Product Code: QT603
- Availability: 3-5 Days
£25.74 Inc VAT £21.45 Ex VAT
This product has a minimum quantity of 7
Quantec Network Splitter
An essential wiring/installation aid for C-TEC's Quantec Addressable Call System, it includes one input and one output connection for Quantec's 'Spine' wiring (typically 1.5-2.5mm T&E) and six fused 400mA ‘limb’ connections for the wiring of individual circuits containing Quantec's field devices (typically 4 core stranded security cable).
At least one QT603 is required per Quantec system (the more you use, the easier it will be to program and fault-find).
Install one QT603 per corridor junction (locate at the end of the corridor nearest to the Quantec Controller). If the corridor is longer than 50m, install the splitter in the centre of the corridor to reduce wiring runs.
Mounts on a standard 25mm UK double gang back box.
Helps protect against open and short circuit faults and reduces the risk of volt drop.
Compatibility Quantec Addressable Call System.
Indicators Power & Fault.
Controls None,
Connections 2 x Net + and Net -; 6 x Limb connections (+ and -).
Product dimensions (mm) 146 W x 87 H x 35 D mm. Mount on a 25mm deep back box.
Operating conditions -5ºC to +40ºC. Max relative humidity: 95%.
Notes A s/c on any limb will cause a current to flow and, provided the resistance of the circuit is low enough, its fuse to blow and yellow fault LED to illuminate.
This fault will reported to the QT601/2 as a series of device failures.
