CTEC CFP Alarmsense Conventional 2 zone panel Two Wire CFP702-2

CTEC CFP Alarmsense Conventional 2 zone panel Two Wire CFP702-2

Brand: CTEC
Product Code: CFP702-2
Availability: 3-5 Days

£186.90 Inc VAT £155.75 Ex VAT

Qty

0 reviews / Write a review

CTEC CFP AlarmSense Conventional 2 zone panel (Two Wire)

CFP Alarmsense 2 zone, two-wire fire panel.

The CFP702-2 includes two AlarmSense zones, four conventional sounder circuits, class change & alert inputs and onboard fire & fault relays.

A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities

Includes 2 AlarmSense zone circuits.

Note: requires 2 x 3.4Ah lead acid batteries.

For use only with Apollo AlarmSense two-wire detectors, call points and sounders.

Approvals/certifications       Certified to EN54-2/4 by the LPCB (0832-CPR-F0386)
Mains supply          230V 50/60Hz
Mains rated current                  350mA maximum
Internal power supply        19V-28.5V (27V nominal). Ripple 7V maximum (battery fault)
Total output current limited to 1.5A @ 230Vac (ImaxA eq 146mA)
Quiescent current                           25mA (mains failed, internal sounder active, PSU & gen fault LED lit)
Max battery size and type                2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah
No. of detector zone circuits         The CFP702-2 has 2 AlarmSense zone circuits which are compatible with Apollo's AlarmSense range of detectors & call points AND sounders & visual indicators       Max. devices per detector zone    25 AlarmSense detectors/manual call points per AlarmSense zone
No. of conventional sounder circuits     4 - these are additional conventional (non-AlarmSense) sounder circuits; Max. length per circuit is 500m
EOL resistor value                                      6800Ω 5% Tol. 0/25W (blue, grey, red, gold)
Alarm voltage       27V max, 20V min (final battery voltage)
Max. sounder output current                  Each AlarmSense zone circuit conventional sounder circuit will support a max. current of 200mA. Total sounder loading per panel should not exceed 1.25A
Expansion connections       Yes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards
Product dimensions (mm)                     380 W x 235 H x D 96mm
Construction & finish       Plastic lid and base; RAL7035 textured
IP Rating IP30
Weight    1.75kg (without batteries)